e-Ink display / thermometer outdoor logger housing
Description
two part (outdoor) housing for a 2.9" waveshare e-ink display and a ESP / Arduinio controller Front part with rain protection for display (big roof over display) Back part has a upper compartment for the controller with cables connected directly to the pin header Lower part with a lot of ventilation openings for a DHT11 / DHT22 or any other weather sensor Both parts can be closed with the same back plate for weather proofing I added a shrink tube over the cables from display to controller and some hot glue in the cable hole. You can mount both parts together using (stainless) M4-bolts, or mount the display part alone e.g. to a woode surface. I finished it with some gray paint to match the e-ink background I included also the step files, if you want to change / remix it. Have fun! Sebastian
Statistics
Likes
5
Downloads
0