Hemera Linear V2 For top and side mounted rails (Ender3/5 Plus and more)
Description
** still a work in progress, but this is the system i run now on my e5+ and e3 machines.. E3D hemera mount for linear rails with 20x20mm hole spacing, 5015 radial fan V1_Mounts Was mount was designed for Ender 3/3 PRO with the 3DFUSED X gantry conversion with MGN12H Carriages (but will fit other printers with the same rail system/setup) https://3dfused.com/product-category/linear-rail-kits/ V2_Mount Was designed for Ender 5 Plus with top mounted linear rail and MGN12H And the belt system still in its original place.. (but will fit other printers with the same rail system/setup) *This one is still under development. I'm pretty sure it will be useful for other linear rails system/printers with the same hole spacing For Probe Left Offset is X-30.80 Y0.00 Z-2.58 (v1 only) For Probe Right Offset Is X62 Y-10.2 Z-2.15(ish) its around -2 you just have to start with a safe height and adjust it down untill you get the correct height (v1 and v2) The cooling duct shown in this designe can be downloaded from redangel1984 https://www.thingiverse.com/thing:4121546 To fit the Fan/BLT adapter to the hemera i will need some hardware. 3 M3x25mm 4 M3x6mm
Statistics
Likes
13
Downloads
0