Ender 3 Dual Z axis - No Z loss, stock mounting hardware, anti backlash nut compatible
Description
Upgrade your Ender 3 with a dual Z axis! This plate fits to the floating side of the Ender 3 X axis, and only requires the stock mounting hardware. This is compatible with either a regular or an anti backlash TR8 leadscrew nut. This bracket has been designed to minimize flex. Support is required to print, but should only be required on flat surfaces and therefore be easy to remove. All other locations should be easy to bridge. This bracket fits under the T slot wheels (where the original 8.5mm spacers sits) and is held in place by the wheels This is part of my Ender 3 single stepper dual Z system. Find all parts here: https://www.thingiverse.com/thing:4583416 - Dual Z plate https://www.thingiverse.com/thing:4581014 - Fully adjustable Z rod mounts / stabilizers https://www.thingiverse.com/thing:4582645 - Belt tensioner Optional- https://www.thingiverse.com/thing:4581024 - Anti backlash adapter https://www.thingiverse.com/thing:4581042 - Lifted adjustable stepper mount The complete upgrade requires: 1x TR8x8 Leadscrew (or 2x TR8x1 or TR8x2 or TR8x4 leadscrews, depending on preference. I use TR8x1 for the highest resolution) 1x TR8 leadscrew nut or anti backlash nut (2 if changing both rods) 2x 608 bearings 2x Timing belt pulleys (I use 20mm/60 tooth pulleys, any size will work 1x timing belt (From 696mm to ~800mm, I use 752mm) M3 mounting hardware and T slot nuts.
Statistics
Likes
17
Downloads
0