Anycubic Mega Zero SKR Mini V2.0 Enclosure
Description
Anycubic Mega Zero SKR Mini V2.0 Enclosure I wanted to have silent drivers on the Mega Zero and add a heated bed. The stock board has soldered drivers and doesn't have a Mosfet for a heated bed so I decided to design a new enclosure for the SKR Mini V2. It uses the Mega Zero stock display. Might not be compatible with others. The firmware required modifications on my Mega Zero but is a highly customized setup as the building volume has increased to 230x230x250 and I have a heated bed. This might damage a Mega Zero with a different setup and I accept no responsibility for any damage caused. This firmware can be found below if someone wants to use it as a starting point for their build: https://github.com/ssevillano/Anycubic-Mega-Zero-SKR-Mini-V2.0 The stock power brick does not have the amps required to power a heated bed and used a Mean Well LRS-350 attached to the frame using the following thing mirrored to fit on the left Z extrusion: https://www.thingiverse.com/thing:2986488 I used the stock bottom metal plate to close the enclosure and the same screws to attach to the frame. UPDATE: BigTreeTech has released a board that is a direct replacement of the Mega Zero stock board. If using that board this enclosure is not necessary: https://www.aliexpress.com/item/1005001581410518.html
Statistics
Likes
33
Downloads
0