Prophet 600 LED Wheel Lights
Description
Do you wish your Prophet 600 wheels would light up? Well now they can! Uses the original nut and bolt that centers the pitch wheel. Requires 4x 5mm LEDs (red but any colour will do) and either a 750ohm 1/2W resistor or 2x 1.5k 1/4W resistors in parallel. This runs them at a combined 20mAh. Wire to the +15V rail (yellow) and GND (black) on the wheels themselves. Please don't do this yourself if you don't know what you're doing, don't blow up a nice old synth <3 No responsibility on my half if something goes horribly wrong.
Statistics
Likes
0
Downloads
0