Nerf Retaliator 2-Part Slide Adapter for Pump Kit
Description
Top slide adapter for the Nerf Retaliator, to be used in conjunction with a pump kit. The holes were made to accommodate 1/8"x1/2" aluminum flat bars. This version incorporates its own Nstrike top rail and has an open spot where the Retaliator's top rail spring/button can be transplated to. It also has reinforced side ribs to account for a certain weakness in the core geometry. The main difference is that this version splits into two halves and is designed to clamp down on the top slide rail with the help of M3 screws. This removes the need to use too much force to pressure-fit the adapter into the slide, and also makes it easier to attach/remove the pump kit itself as the priming bars can thus be prepared separately. <hr> # Hardware - (6) M3 Hex Nuts - (4) 8mm M3 Screws - (2) 10mm M3 Screws The 8mm screws are used to attach the priming bars to the slide adapter. The 10mm screws are used to attach the two halves of the adapter together. Note that the top rail is offset so that 10mm+ longer screws would also work without interfering with the rail attachments. They just...wouldn't look very good.
Statistics
Likes
10
Downloads
0