MSI Optix MAG24C Vesa Mount Adapter
Description
If you have ever tried to use a standard VESA mount with the MSI Optix MAG24C you will notice that the cut out for the mount is under 100mm on each side, so a standard VESA mount will not fit. In addition there is a 25mm plastic piece inside of the hole for the VESA mount so even a small 75mm x 75mm VESA mount will not work. With this small piece you can elevate the VESA mount above the original cut out, allowing you to use the standard 75mm x 75mm hole pattern. Note: The screws in the mounting holes originally are not long enough so you will need new ones, I used 4 M4 x 16mm bolts to secure the mount
Statistics
Likes
2
Downloads
0