Bike cassette sprocket cleaner, scraper (8-9-10 speed cassettes)
Description
This scraper works with 8, 9 and 10 Speed Cassettes. Maybe also with 11 speed, but I haven't tested that yet. Since the gap between the sprockets is a bit different on different speed cassets, there are 2 files for the middle part of the scraper. One is a bit thicker to fit better on 8 speed cassettes, but you can also use the thinner one on 8 speed cassettes. Make sure your printbed is leveled correctly and the printbed adhesion is good because otherwise these parts may warp easily. I printed the scraper with PLA and it works fine. Additional parts needed: 2 countersunk bolts M4 x 12 mm 2 nuts M4
Statistics
Likes
27
Downloads
0