Geeetech 2in1 mount Hero Me compatible
Description
This mount is designed to work with the Hero Me Gen 5 system. This is the Gantry Plate and Hotend mount only. There is also 1 beefed up fan duct in this collection. You must get ABL and Fan ducts from https://www.thingiverse.com/thing:4460970 I do not include any of that. He has a very good write up about the whole system. There is no need for me to repeat what he has done. There are a few changes that are listed here. Do to the positioning of the hotend on Geeetech A10M and A20M the Gantry Plate has ABL on the right side instead of the left side. This is to prevent hitting the X axis cover with the ABL portion of the gantry mount. However there is a Left ABL mounting option included for sensorless homing option. If you use the Right Gantry mount make sure to mirror the correct ABL Wings and Sliders or they will be backwards. All Hotend Bases use 30mm fans at this point. I will be adding 40mm fans after I get some fans and test. BTT Mix Base Gen5 Standard is 100% compatible with any of the Hero Me Gen5 fan ducts. BTT Mix Base Gen5 HD is not compatible with any of the Dual Duct fans ducts. You have to use the Left and Right ducts. Factory Hotend Gantry and Base Abandoned as I no longer have the factory hotend. Personal recommendation for ABL: BLTouch Compact Wind and Slider Personal recommendation for Fan: 5015 Lightweight Forward Left and Right Ducts. You will need to adjust Marlin Firmware define X_MIN_POS 0 (only do this for Left Gantry Mount) define Y_MIN_POS -3 define NOZZLE_TO_PROBE_OFFSET { 38.0, 5, -.68 } (for BLTouch right mount Z is starting point) define NOZZLE_TO_PROBE_OFFSET { -38.0, 5, -.68 } (for BLTouch left mount Z is starting point) 9.20.2020 Updated Gantry Plates to accommodate V roller bolts. Added 5015 remixed fan duct. 2 legs were beefed up for more strength. 9.25.2020 Cyclops Gantry Plate Right Added. Mirror in slicer if you want left ABL mounting. Uses BTT Mix Base Gen5. Cyclops uses the back mounting holes in the heat sink. 10.5.2020 Added Cyclops+ Base. Base is HD style. CANNOT use single fan Dual Duct Part cooling. Uses Cyclops Gantry Plate. I do not own a Cyclops+ so feedback is more than welcome. 7.14.2021 Added Base Mount STEP
Statistics
Likes
11
Downloads
0