Ubiquity Cloud Key rack kit
Description
I Really wanted to rack mount my CK gen 2 in my 19" network rack. The commercial product is $100+ and existing prints were missing features I wanted. Goal: I wanted CK in a full-width 19" 1U rack mount with the Ethernet jack on the front panel. Solution: print a small holder for CK that can be attached to a 1U blanking plate which should give a nice visual and good rigidity. Also add a keystone jack holder to allow the Ethernet port to be moved to front panel. Bonus: Make mounting holes on CK Holder the size and location of standard rack screw so that it can be mounted without the blanking plate! Double bonus: The Usb C can also be brought to the front with a keystone passthrough! Set screws may need to be tapped - should be M3 and longer than 2mm. I used a StarTech 1U blanking plate. Future ideas: Additional models for the keystone holder to have the screw holes in the alternate locations and/or 4 holes. Keystone holders in a 2-gang so USB C and Ethernet can be brought up without having to cut 2 holes in blanking plate.
Statistics
Likes
2
Downloads
0