CR-6SE Runout Sensor to Extruder Bridge
Description
This part accepts a 19mm long PTFE tube and gets placed between the extruder and filament runout sensor of the Creality CR-6SE. Line the cutout on the bottom of the part with the boss that holds the bolt that fixes one half of the Z axis lead screw to the frame and wiggle into place. You might have to twist the filament to get it to feed all the way through, but it's much better than having to guide the filament into the extruder with tweezers or your fingers. Part does not interfere with the Z axis lead screw.
Statistics
Likes
10
Downloads
0