ETC Nomad USB Key Housing (Green)
Description
This is a printable housing for use with an ETCnomad USB key* and Switchcraft EH Series USB Type-B to USB Type-A Feed-Through Connector.** The ETCnomad USB key is extremely tiny, and even with the serial tag and usb drive attached, it can be easily misplaced—give it a housing and not only is it easier to keep track of, you also protect its' USB plug from wear and tear! There is a loop on the bottom which can be used to attach the serial tag and usb drive. The USB connecter is attached to the housing with M3 screws—no need to use a tap. There are four files to chose from: —Blank —ETCnomad Logo Only —ETCnomad Logo, on front; BASE (1024) on back —ETCnomad Logo on front; UNLOCKED (6144) on back *Sentinel HL dongle only, this will not work the the purple "Client" dongles. If you have a purple dongle use this remix: https://www.thingiverse.com/thing:4592421 **This is the USB connector I had on hand and the only one it has been tested with. I imagine it will work with other D mount USB connectors, such as those by Neutrik, but proceed with caution, the internal depth clearance is 53mm. A special thanks to Harrison Freni, whose nomad key housing using Neutrik parts inspired this design. Remix it here: https://www.tinkercad.com/things/lKcjWaymQb7
Statistics
Likes
4
Downloads
0