Caldari Drake (Eve Online) plus display stand
Description
I cut up the file from a github repository of 3d models pulled directly from the game files. The Fins need to be printed at .08mm layer height with a .2mm nozzle in order to achieve the level of detail required. I just printed the main body and stand in two parts at .2mm layer height with a .4mm nozzle. I used a 3d pen in order to weld the parts together, then wet sanded with 220grit then 400 grit sandpaper, then with 3M polishing cloths. If needed, you can rub some chapstick into the part to help hide the sanded marks.
Statistics
Likes
7
Downloads
0