Polisher 170mm Complete Remix some Tweaks
Description
while slicing, printing and assamling some problems occurs, so i made some changes ... - created some better flex foots .. Polisher-2.v3-foot_Flex_x4.stl - closing holes in the model .. Polisher-4.v3-casing_b.stl - gear is wobbeling, so i made a better fitting .. Polisher-7.v2-drive_gear_fixed.stl or Polisher-7.v2-drive_gear_made_fixed.stl - the inner case holes dosent match the case holes for holding the wheels .. so i sanding the holes bigger, now they are oval and i want secure the inner casing with a knob because of an gap between gear and inner case .. Polisher-8and9.v1-d-support_wheel_clamp_x4.stl - made the drum-rip higher ... Polisher-11.v2-drum_rib_x3.stl i bought this motor https://www.amazon.de/gp/product/B07D8T7KXZ/ and this controller https://www.amazon.de/gp/product/B07CG97HDL but it is not the best option .. for example the shaft of the motor is very short .. should buy another but i first give this one a try .. may be i redesign all later ^^ good luck and happy printing and yes the color is freaky but this was actually here .. ^^
Statistics
Likes
3
Downloads
0