Big Boy 6x6 dual output Axial transmission and carrier kit and rear steering
Description
this is the big boy kit for the axial umg 6x6 or scx10 umg10 or whatever you wanna fit it in. It is a dual output transmission that uses scx10 transmission gears and bearings are 8x16x5mm, 5x14x5mm and 5x10x4mm you will need 2 scx10 output gears. the files in the big boy 3 is the whole standard kit. The reversing carrier is if you are using a standard scx10.2 rear axle not the umg6x6 stock axle. the shaft for the carrier is axial part number AX31410 the plastic ring is press fit on the shaft. you may need 5mm flat washers and or 3mm o-rings to the the proper spacing on the shafts for the carrier and the transmission shaft check facebook for more info @mofoxrc MOFO rc motor forward rc.
Statistics
Likes
13
Downloads
0