Invisible Drone
Description
<i>This text is in status "work in progress"</i> <h2>3D printable drone frame for Insta360 One R</h2> <b>I wanted to build a drone to bring up my INSTA360 camera in the air. The big challenge was to design it, that it will not be visible in the video. I already made it. It's not perfect, but it is quite good. You have to use slim Motors and props.</b> <b>The drone will be quite heavy. Incl. battery its more than 500g. But it flies and the effect is very cool. The sample footage below is from my first build, where some parts of the frame were still visible. This one here already is the version 2 which should be better, but still is not perfect.</b> <h2>To be used with the following RC parts:</h2> <b>FlighController:</b> 20mm FC Stack (e.g. Mamba F405 mini stack) <b>Motors:</b>RCIN GTSv2 1506 3000 or better: BetaFPV 1606 2550kv --> fitting version of the arms are in progress <b>Props:</b> HQProp Durable 4020 T4X2X3 <b>VTX:</b> 20mm Mount (e.g. TBS unify nano) <b>Cam:</b> FPV cam 19mm (micro format) <b>Receiver:</b> as you prefer (e.g. FRSky R-XSR) <b>Battery:</b> Tattu 4S 1050mAh 75C <h2>What you also need:</h2> <ul> <li>Insta360 One R 360</li> <li>4x 5mm M3 spacer (25mm long)</li> <li>8x M2 screw (ca. 23mm long)) <li>8x M3 screw (8mm long)</li> <li>8x M3 screw (12mm long)</li> <li>8x M3 square nut</li> </ul>
Statistics
Likes
16
Downloads
0