ETC Nomad USB Key Housing (Purple)
Description
This is a printable housing for use with the old purple client (now ETCnomad) USB key and Switchcraft EH Series USB Type-B to USB Type-A Feed-Through Connector. If you have the smaller, green key then go here: https://www.thingiverse.com/thing:4587573 There is a loop on the bottom which can be used to attach a keychain or similar. The USB connecter is attached to the housing with M3 screws—no need to use a tap. There are four files to chose from: —Blank —ETCnomad Logo Only —ETCnomad Logo, on front; BASE (1024) on back —ETCnomad Logo on front; UNLOCKED (6144) on back A special thanks to Harrison Freni, whose nomad key housing using Neutrik parts inspired this design. Remix it here: https://www.tinkercad.com/things/dq5l4Vziq51
Statistics
Likes
0
Downloads
0