Creality Ender 3 Pro - Vertical Extruder Motor Mount
Description
It didn't make sense to me to have the filament feed 90° to the nozzle and I saw a video on YouTube where a guy mounted the extruder motor vertically but still required a filament guide. So I came up with this. It's not refined by any means but does work as expected. The fasteners are #10-32UNF x 1/2" long. I cut off some screws I had laying around. The nut plate I tapped for the #10-32. Even with the nozzle at maximum Z limit the filament tube is not in a bind. The motor cable extension I bought on eBay. https://youtu.be/iq9Sm-h4Pqg
Statistics
Likes
9
Downloads
0