Amiga 1200 Network, HDMI, microsd extender back trap door
Description
Modified back trap door with slots for HDMI and RJ45 network. Also made an opening for pulling a microsd extension out of the computer (Micro SD Memory Card Slot to TF Card Extender Cable Extension) The HDMI connector socket is designed to hold the hdmi type a fpc socket with a flat cable. Search ebay for "hdmi fpc socket". https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=hdmi+fpv+socket&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=hdmi+fpc+socket Here is a package with hdmi female, male and cable: https://www.ebay.com/itm/Type-A-Male-FPC-to-CYFPV-Straight-HDMI-Female-Flat-Cable-for-HDTV-Multicopter/382598636360?ssPageName=STRK%3AMEBIDX%3AIT&var=651361237516&_trksid=p2057872.m2749.l2649 Recommended hdmi cable lenght is 20 cm. Screws: One M2x10mm for the ENC28J60 Ethernet Module LAN Two M2x10mm for the HDMI clip Get some flat ribbon cable for the network module, and remove the top on one end or else it will be touching the floppy drive. See pictures for description. https://www.ebay.com/itm/10pcs-10pin-2-54mm-IDC-Flat-Ribbon-Cable-Wire-for-Atmel-AVR-ISP-JTAG-DownNWUSHH/303636924114?hash=item46b22bc6d2:g:DEwAAOSwfLxbEfQf I use it on my Amiga 1200 with a Vampire 1200 accelerator. Use it together with my other designs to hold the sd card extender: https://www.thingiverse.com/thing:4563129 or https://www.thingiverse.com/thing:4578398 Another version with HDMI which i have created, is this one: https://www.thingiverse.com/thing:4563133
Statistics
Likes
6
Downloads
0