Whirlygig Garden ornament

Whirlygig Garden ornament

Description

https://www.youtube.com/watch?v=Uheygw-8A0Y BOM: 3D printed parts 3x 606-2RS Bearings 17x6x6 6mm Carbon Fiber Rod Assembly: Cut a length of 6mm rod long enough to thread the body assembly on to Press fit the bearings in to the blades and hub. Thread the body components on to the rod in the following order, Nose > 5mm Spacer > CCW Blades* > Hub** > 5mm Spacer > CW blades* > 3mm Spacer > Fin *Concave curve of the blades facing towards the nose. ** Integrated spacer towards nose. Cut a length of rod to the height you want your whirly gig and insert it in to the bearing on the bottom of the hub, you can then mount the whirlygig on to the base plate which can be screwed down or directly inserted in to a drilled 6mm hole.

Statistics

Likes

18

Downloads

0