OpenRacer quadcopter frame. Check GITHUB link!
Description
**ALL most recent files are located here:** **https://github.com/OpenRacer/OpenRacer** **This thingiverse page is not being updated.** Opensource frame with 3D printed pod for racing and freestyle. This design is created from scratch and Inspired by the brilliant CampfireQuads frame I been flying for 2 years. Campfire frame is not opensource, plus I wanted some things to be fixed and Caddx Vista pod option. So here you are, **OpenRacer frame**, files are opensource. Use, fly, enjoy (at your own risk :)) With GoPro mount and gopro7 cases: https://www.thingiverse.com/thing:4595328 Can order the frame from here: https://www.cyclonefpv.com/collections/cyclone-fpv-frames-and-kits/products/openracer-5-inch-racing-frame Or carbon CNC company: https://cncmadness.com/ Recommended 3D printed company: https://www.phx-3d.com/ Frame weight with 3d printed analog pod: 78g no braces 90g with braces Caddx Vista pod if needed for HD FPV experience: https://www.thingiverse.com/thing:4567374 Top and Bottom plates: 2.5mm carbon Arms: 5mm carbon Braces: 4mm carbon **Required screws, nuts, and standoffs described in "Hardware.txt"** The canopy can be printed in stiff TPU. Nylon will be a little lighter and a little bit stiffer. **Cut, print, fly, enjoy at your own risk.** The author is not responsible for the usage of these files, parts and electronics. The analog version works with most of normal 20x20 and 30x30 stacks. Here is what I recommend: * FC: [Clracing F7](https://pyrodrone.com/products/clracing-f7-v2-1-mpu6000-30x30-flight-controller) * ESC: Any 30x30 Blheli32 ESC like Spedix, Hobbywing etc. starting from 35A. Be carefull, modern 30x30 Aikon ESCs are too big. Or [STACK](https://pyrodrone.com/products/pyrodrone-f4-osd-stack-combo) instead of FC&ESC * Camera: [Runcam Racer 3](https://pyrodrone.com/products/runcam-racer-3-1000tvl-4-3-ntsc-pal-cmos-micro-fpv-camera) or [Predator Micro V4](https://pyrodrone.com/products/foxeer-micro-predator-v4-fpv-racing-camera-1-8mm-lens-solder-pad-version-choose-color) * Vtx [Rush Tiny Tank](https://pyrodrone.com/products/rushfpv-tank-tiny-5-8ghz-vtx-smart-audio-0-25-100-200-350mw-us-version) * Motors: [RCINPOWER GTS-V2 2207PLUS 2207 1860KV](https://pyrodrone.com/products/rcinpower-gts-v2-2207plus-2207-1860kv) or [Vanover Motors](https://rotorriot.com/products/hypetrain-vanover-2207-5-1860kv-motor) or [Talon](https://www.heli-nation.com/talon-faf-2207-1860kv-5-6s-cw-brushless-motor-black-chrome-edition) * Props: [GEMFAN 51466X3 HURRICANE](https://pyrodrone.com/products/gemfan-51466x3-hurricane-durable-4pcs-mck) * Batteries: [Rline v3 1300Mah 6S](https://pyrodrone.com/products/tattu-r-line-version-3-0-1300mah-22-2v-120c-6s1p-lipo-battery-pack-with-xt60-plug) or any good brand like Pyroflip, GNB * [U.FL TO SMA EXTENSION](https://pyrodrone.com/products/tbs-u-fl-to-sma-extension-6cm) * Small antenna like [TrueRc](https://pyrodrone.com/products/truerc-singularity-5-8-stubby-antenna-lhcp) * receiver for your radio * optional short race wires like [Pyro race wires](https://pyrodrone.com/products/pyro-race-leds-25mm-4-pcs) * zip ties, double side tape, heatshrink, electrical tape, screwdrivers, charger, goggles, radio, soldering iron, scisors, etc :) If you like these designs, you can donate me for a cup of coffee :) https://paypal.me/limonfpv
Statistics
Likes
30
Downloads
0