Sapphire PRO Mosquito Hotend mount
Description
# Sapphire Pro Mosquito Hotend Mount I have created a mount for a Mosquito Hotend with E3D Bowden Groove mount. It should be easy to print, stable and use as many original parts as possible. I also wanted to improve the component cooling by tilting the fans. For the mounting the original fan and hotend mount has to be removed. I have tried to write a mounting instruction (Assembly_instructions.pdf) I hope it is understandable. Only two additionall M3X25 screws and two M3 nuts are needed. Assembly-Tip: For the placement of the M3 nuts I used M3X25 screws as an assembly tool. I have printed all parts with ABS. It probably works just as well with PETG. No supports needed. I will continue to make and publish improvements to the design.
Statistics
Likes
15
Downloads
0