Yet another Universal Phone Stand
Description
There are virtually hundreds of designs for phone stands. So why yet another one? Well I liked the functionality of the simple ones but was looking for a slightly more elegant design. Furthermore the stand should be able to carry several different types of phones with or without protection cover/bumper. Many of the models I found were two narrow to allow cover (design was inspired by [this](https://www.thingiverse.com/thing:2737639) , but unfortunately that didn't fit phones with cover so I desigend my own) It should also be possible to charge the phone on the stand, so the phone must be elevated a bit to plug in the cable underneath - including special models like my good old Samsung Galaxy S5 which has a cover over the USB3 slot, requiring extra space when charging. I have uploaded different variants of the design. The default one with a horizontal stabelizer in front and some extra little feet at the back to avoid rolling. For some cables you might need the version with higher elevation. And for the design fans I added a pure version of the "round corner" design with no stabelizer or extra feet. If you need a slightly modified design with different measures, drop me a note and I'll provide another variant (sorry, don't have SCAD file or similar for self customizing) Update 2020-10-19: I added yet another version with a wider front (small holding pins only), which allows to operate the lower "buttons" besides home without removing phone from the stand.I kind of breaks the design a bit, but is useful (at least for my phones). I also elevated the models by 5mm to allow more types of cables for charging without bending the cable too much.
Statistics
Likes
5
Downloads
0