Prusa I3 - Raspberry Pi HQ Cam mount
Description
Thank you for your interest in my camera mount for the Raspberry Pi HQ camera. For the still quite new HQ camera, I couldn't find a suitable holder for mounting on the X-Stepper, so I'm publishing my own design here. The HQ camera with wide angle lens (CS mount) is heavy, so the arm of the holder must be very stable. I use PETG filament, printed with 5 perimeters and 50% infill. The holder for the camera is also adjustable in height. The following material is also required to assemble the holder: 4x screw M2.5 x 10mm & M2.5 hex nut (camera). 2x screw M3 x 6mm & M3 hex nut (height adjustment). 2x screw M3 x 14 (16) mm & M3 nyloc nut (arm attachment). 1x screw M3 x 18mm (stepper fastening). optional: 1x USB touch dimmer lamp. Update 03/21: RPi_HQCam_Back V1.3 with additional strain relief for the ribbon cable, needs 2 x screw M3x6mm & 2 x hex nut M3. Links: https://www.raspberrypi.org/products/raspberry-pi-high-quality-camera/ https://www.youtube.com/watch?v=VDWORgW31Sw&feature=emb_imp_rv_oc https://www.youtube.com/watch?v=MVgr302PNwY&feature=emb_rel_end https://www.amazon.de/gp/product/B07Z38K8MK/
Statistics
Likes
66
Downloads
0