Brushless Drone Frame (65mm whoop with 35mm props)

Description

This is a true 65mm frame size with 35mm props and a proper WHOOP form FC. As you know, UZ65 is the only whoop frame that can use 35mm props. And the FC that can be mounted on the UZ65 frame has a special slim form, moreover, UZ65 is not a 65mm frame. See attached instruction [instruction_TWBL6535.pdf] that explains how to build. Printing parts (STL file name) (see photo with numbers) - 1: TWBL6535_frame.stl - 2: TWBL6535_drilling-guide_1&4.stl - 3: TWBL6535_drilling-guide_2&3.stl - 4: FC-damper_4set_H3.5.stl or FC-damper_4set_H4.stl (print TPU) - 5: TWBL6535_battery-holder_1S.stl (pint TPU) - 6: TWBL6535_battery-holder_1Sx2.stl (pint TPU) - 7: TWBL6535_battery-holder_2S.stl (pint TPU) - 8: TWBL6535_battery-holder_joint.stl Purchasing parts - Frame: Eachine UZ65 (Banggood parts number: 1669808) - Props: HQProp 35mm 3-blade (Banggood parts number: 1656543 [red], 1662401 [grey]) - Flight controller (FC): Typical Tiny Whoop type Brushless FC, but the opposite dimension must be 27mm or less *confirmed FC [ Perfect fit! ] --BETAFPV F4 1S , Lite 1S (Silverware) [ Desoldering motor plugs is required ] --Happymodel Crazybee F3, F3 Pro(1-2S), F4 Pro V1.0(1-2S) [ Attention!! Not attachable ] The camera/VTX connector hits the duct --Happymodel Crazybee F4 Pro V2.1 or later (V3.0) --Happymodel Crazybee F4 Lite, CrazybeeX - Motors: brushless 0802 or 0603 (choose anything you like) - Camera & VTX: (choose anything you like) - Camera mount: (choose anything you like) - Screws (material RENY or metal): size M1.4x3 (x12 for ducts, x4 for battery-holder) - Screws (material RENY or metal): size M2x5 (x2 for 2S battery-holder) - Screws: Banggood p/n: 1406940 (self tap screw) or material metal: size M1.4x8 (x4) Recommended tools - Drill: 1.1(pilot hole for M1.4), 1.4, 1.7(pilot hole for M2) - Metric Taper: M1.4x0.3mm, M2x0.4mm

Statistics

Category

Tags