Blowie Mk1 | custom cooling for |Alfawise U30 & U20|Longer lk4 pro|
Description
****Check out the new version! Blowie MK2 (https://www.thingiverse.com/thing:5142561) **** _____ With this custom hot end shroud you can mount two 5015 blower fans for part cooling that drastically improve the quality of overhangs and bridging compared to the original fan. I used the original part cooling fan (40mm) for cooling the heat sink, so if you want to use the original cable whithout resoldering you can simply swap the connection on the motherboard between part cooling fan and the original heat sink fan. For the blower fan you have to solder them to the original heat sink fan cables. If you have capton tape put it in the shaped wall near the heat break. FASTENERS required: Screws (not with flat head) 10 M3/9mm (2 bltouch support / 4 fans supports / 4 duct (optional)) 4 M3/20mm (heat sink fan) 2 M3/6mm (plate screws) 2 M3/17mm (Bltouch) 4 M4/22mm (blower fans) Nut 14 M3 4 M4
Statistics
Likes
37
Downloads
0