adjustable RC plane wall mount
Description
-this wall mount can be used for mounting via wings, landing gear, or both. -parts 2b & 3b are shorter and are ideal for mounting via wheels. -parts 2a & 3a are better for weaker landing gear (thinner wire or not as solid of connection) and having axil through both wheels -you will need 4 bolts for connecting the wing rack, 1 for wheel bar, and 2 for each of the clips. large bolt: less than 6.5 mm in diameter X more than 30 mm in length. smaller bolts: 5mm or less in diameter by more than 24mm in length. -you will need to print 2 of part 4. I only put one in because you can't print 2 on a 200mmX200mm printer. -parts with a [_ of _] mean that they were broken down to fit on 200mmX200mm printers, but if you have a bigger printer then I would print full size. -I have all of the pieces orientated for maximum performance. -I will try to make a video explaining the assembly. if you don't have access to a 200mmX200mm printer, comment on your size and I will do my best to make it fit. --9-16 UPDATE-- - for part #7, you can print it in one piece if the max build size measures 300mm or more from the opposite diagonal corners. I will try to explain better when I get the time to make a video. -- 9-30 UPDATE-- - I had my teacher print off some of the pieces for me while I was gone and I discovered that it is too confusing. I will end up making new uploads for the different setups. - If you are wanting to print this save it, but do not download yet as some things need to be fixed. -I will add the links to the new uploads once I get all the problems worked out.
Statistics
Likes
1
Downloads
0