Rc Bodyshell -GTA V- BF Injection 313mm
Description
Hi! This time i'm sharing something more easy to build. It's a car from GTA V. I've spent 7 full days working on the files, fixing the mesh, making it printable so please take a look at my video and leave a like on Youtube if you want to support me. Cheers! Please read: > All parts are designed to fit 220mm printers but make sure your printer is well calibrated and centered because the bodyshell will use the whole bed width. > If you are not able to slice the part, your Brim, Raft or Squirt is probably too large and exceed the print bed. Try to reduce them in your settings. >For CR10 users (or equivalent printers) you can try the "1part" file. Not tested yet but it fits in those printers and should work. > Total print time is about 60hours. > Total weight is less than 300g. > recommended settings: Material: ABS Supports: ON Brim: 3mm Speed: 50mm/s Wall thickness: 1.6mm Infill: 50% > Post processing recommandation: wet sand at 90, (most important step is here, remove all the layer lines) wet sand at 400, apply putty filler on the gaps (between the 2 main parts) wet sand the gaps area. apply primer, wet sand at 1000, Paint. >Works great on 313mm or 300mm wheelbase chassis.
Statistics
Likes
101
Downloads
0