FlowerShower the vase mode watering can
Description
## FlowerShower - the super fast watering can FlowerShower is a simple and ergonomic *watering can*. It is designed to be printed in **vase mode**, only one layer thick. [Here's](https://youtu.be/jhBP8nsewac) a link of the watering can in action. - **Full capacity**: ~1L - **Usable capacity**: ~0.85L - **Print mode**: vase mode (spiralized outer contour) - **Extrusion width**: 0.8mm suggested for water tightness (can be achieved also with "standard" 0.4 nozzles increasing the *extrusion width* parameter!) - **Layer height**: 0.3mm suggested for overhangs (0.4 for super fast or 0.2 for super water tightness) - **Material**: PETG probably is better for time endurance but PLA will have less overhangs or tightness issues - **Bottom**: suggested ~1.5mm-2.0mm with linear and layer crossed patterns to increase tightness My version is printed with 3dJake clear PETG. Print it and share your results. It's easy! Click "post a make" or download [3D Geeks: for 3D Printing APP](https://play.google.com/store/apps/details?id=work.twob.threed) and take a pic! I'll be happy to know that my design was helpful to someone.
Statistics
Likes
37
Downloads
0