Galaxy S5 Hard Case (Revised)

Description

A Hard Case Designed To Fit The Samsung Galaxy S5. I Designed This Base For Creating Designer Cases For A Samsung Galaxy S5 Phone. I Print My Cases At 0.1 Mm Layer, Shell Thickness 0.8, Bottom/ Top Thickness 0.8 Mm, With Supports, (Abs Or Pla) Design Samples That I Have Created Using This Model As The Base Are Also Supplied. Updates: 04/02/2014 - Shifted The Locations Of The Power And Volume Button Slots So They Should Be More Centered On The Buttons. Made The Depth Of The Case A Little Shorter (I.E. From 11 Mm To 10.95 Mm). A Test Print Stl Also Included So That You Can Check The Fit Without Wasting Too Much Material. All Older .Stl Files Can Be Found In The Zip Archive. 17/01/2014 - Uploaded Two Additional Cases Based On The Base Case. These Two Are Also Plain And Hex Patterned With The Sides, Top And Bottom Exposed For Those Who Desire A Minimalist Type Case. Giving Total Access To The Power And Volume Buttons As Well As Removing The Top Edge That May Interfere With User'S Ability To Swipe. 14/06/2016 - A Few Folks Have Been Asking Me For The Cad File For This Case. So I Have Uploaded It For Those Who Prefer The Cad File Over The .Stl For Their Own Modifications. It Is An Inventor File (.Ipt) 15/01/2017 - Uploaded S5 Rev4-3_Bumper.Stl As Requested

Statistics

Category

Tags