GOA Breeze : 3 inch HD/Analog racing frame
Description
If you like my work please consider following/subscribing to my feeds : [Instagram](https://www.instagram.com/ledrone.club/) and [YouTube](https://www.youtube.com/c/ledroneclub) Or you can [support me via ko-fi](https://ko-fi.com/ledroneclub) ----- Update 04/13/21 : slight redesign of the reinforcement bars to prevent breaking at screw attach. NEW : the GOAVISTA version supports full micro cameras as the Caddx Vista or Tarsier and alike. This frame version is slightly bigger overall. The Breeze frame was co-designed with GOA FPV to be a compact and robust 3" HD frame made for the Nebula cam (before it came out). I can also be used as an analog low profile build. <iframe width="560" height="315" src="https://www.youtube.com/embed/xnOXt9st2xA" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> ## Specifications * 3 inch trueX layout (unibody) * 9-12mm motor mount * whoop aio (26x26mm) and 20x20 FC mount patterns * nano sized cameras (14x14mm format as the Caddx Nebula, Baby Ratel, Runcam Racer Nano, Foxeer Predator Nano, Caddx Ant, whatever 14x14) * Caddx Vista (for the GoaVista version, and any 19x19 cam of course) * Top or bottom battery mount * optional front/rear reinforcement braces ## Accessories provided (3D Printable in TPU) * Nano cam mount * Rear antenna holder for Vista (cherry style) and Foxeer Lollipop Micro * 4S lipo battery holder (or check my Pickle Toothpick Accessories designs for a 3S one) * An antenna holder bar (i use this on my triangular vtx to prevent the ufl connector to pop out) ## How to get this frame cut in carbon fiber Use the DXF files and get it cut following your specs at any CNC service you like. Here are my recommendations : * https://www.cncmadness.com (amazing quality & service, based in Canada) I recommend you to ask for the following specs : * frame base : 3mm CF optionally chamfered * top plate : 2mm CF * reinforcement braces : 2 or 3mm CF (depending on the solidity you require). NB : you can also go with a 2.5mm base and 1.5mm top plate to reduce weigh at the maximum ## Recommended gear and build tips * The frame would work best with 1404+ motors on 4S but 1303 on 3S is an option for a light build * You need 3 standoffs. i use M2 14mm aluminium on my analog low profile, for a Vista/ Nebula build 23-25mm M2 standoffs would be the right choice.
Statistics
Likes
30
Downloads
0