The perfect ATX Lab PSU cabinet
Description
I did not find a PSU cabinet of my likings, so i drew this one up in Fusion 360 my self, suiting my needs, and my printer. Made this ATX PSU cabinet out of 3 printed parts. You need a printer that are able to print at least 220 X 250mm. to print this. This is printed on a Creality CR-10 pro. When choosing print speed, and if you have a moving table, please remember that the main cabinet is over 700grams of filament that have to be moved in the end, so don't be tempted to go too fast. I printed everything at 60mms. on my cr10. The wire diagram is one I found on google, and supplied mainly to show the colors from the ATX, and the diagram I used to navigate my self. I have used two step up converters, and not only one as shown on the diagram. Part used for this project is as follows: Intrument/voltmeter on top: https://www.aliexpress.com/item/32988488113.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU Voltmeters x3: https://www.aliexpress.com/item/4000106421873.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU Adjustable Automatic Step Up Step Down Power Module Boost Buck Converter Transformer 5V 12V 24V X2: https://www.aliexpress.com/item/4000336912257.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU ON/OFF: https://www.aliexpress.com/item/33030632516.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU USB charger unit: https://www.aliexpress.com/item/4000357088014.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU Banana Sockets x4 pair: https://www.aliexpress.com/item/33050413310.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU Fuse Holders (be aware there is no fuses included, 10 amph) https://www.aliexpress.com/item/4000126701820.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU If u have a unstable ATX, its advised to load the +5V, I did not have to do that on mine. https://www.aliexpress.com/item/32958436867.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU Buck Step Down Module (this one is just for modulating the fan, a bit overkill, but that is what I had laying around) https://www.aliexpress.com/item/32825777330.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU ATX 24 Pin Male to 24Pin Female Power Supply Extension Cable: https://www.aliexpress.com/item/4001293212950.html?spm=a2g0o.productlist.0.0.33c121c4R7xDfi&algo_pvid=90ece457-a97a-437c-ac7d-47dbc5f85396&algo_expid=90ece457-a97a-437c-ac7d-47dbc5f85396-7&btsid=0b0a0ac216004543986536728ef076&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ The ATX PSU is from a scrapped PC.. There is also a 60X60 cooling fan in the cabinet, witch i had laying around. M3 Copper Inserts for the cabinet and side panel M3x5x5 https://www.aliexpress.com/item/32842866575.html?spm=a2g0s.9042311.0.0.27424c4dl7yXOP p.s. If you like and use my work, feel free to donate, so I can have a extra beer while drawing :-) paypal.me/tsigakis
Statistics
Likes
620
Downloads
0