Foot (Rivet Style)- Using 3mm ABS filament to connect foot and backing piece by Acetone Melt

Description

Hi, This Is A Two Piece Assembly That Requires Only A 3Mm Hole To Be Drilled Through The Job You Need A Foot On. This Is Part Of Euring Andy Southern'S New Years Resolution (Day 9 & 10) To Upload 1 Printable (Or Makeable - I'Ve Decided To Devieate There - No Hate Please!) Design Per Day In 2015. As I'M Amending The Rules As I Go Along, This Can Count As 2 Days, 09/01/2015 & 10/01/2015. There'S A Low Res Assembly Stl - Don'T Print From That, Is Simply Shows How The Job Should Go Together. The Normal Loading Of The Foot Will Be In Compression Between The Fixed Surface And The Bottom Of The Item (Or Case) The Foot Is On. This Allows The Part To Transfer The Load Fully Without The 3Mm Filament Taking Any Load. Tailor The Length Of The 3Mm Filament To Suit The Thickness Of The Material It Is Going Through. Why Not Try A Different Colour To That Which You'Ve Printed In? Thanks For Listening. No Rights Reserved, Feel Free To Mass Produce Or Profiteer Off This! Kisses, -Andy

Statistics

Category

Tags