Modular Robotic System - Standard Servo Hinge Joint
Description
This is a hinge joint for robotic applications which is designed to be used with the standard size servo MG996r or MG995. Materials needed: -- 1x MG996r or MG995 Servo incl. attachments -- 8x 2x6mm self tapping screws (for attatching the fork) -- 8x 2x5mm self tapping screws (for optional covers) -- 8x 2,6x8mm self tapping screws (optional for attatching the joint to other parts) All covers are optional. They are not needed for the joint to be functional. The wires can be fed completely through the joint in both directions for a clean wiring setup. It is recommended to use grease or a similar lubricant at the pivot point. This thing is designed to be used with Didis Modular Robotic System. Go and check out the collection: <a href="https://www.thingiverse.com/didismakerindustries/collections/didis-modular-robotic-system" target="_blank">Didis Modular Robotic System</a>
Statistics
Likes
12
Downloads
0