FLSUN i3 plus PSU mount
Description
This PSU mount can be used horizontally or vertically, I upgraded my printer to have a separate PSU for the hotbed. It needs the frame to be placed high enough, my adjustable feet design can be used for that (https://www.thingiverse.com/thing:4567811). It is designed for the 12 V / 360 W PSU that came with the printer. It is slightly larger, so I used a piece of weather strip to hold the PSU firmly in place. The front and back part need each two M4x10 hex head screws and two t-nuts. I have not used the clamps since my print failed and they were not really necessary. If I made these today, I would use M3 size screws instead with an inserted M3 nut.
Statistics
Likes
3
Downloads
0