Raspberry Pi 3 (B/B+) case, VESA mount, internal fan
Description
This case is inspired by [0110-M-P's design of a Raspberry Pi case](https://www.thingiverse.com/thing:922740) #### Features - VESA mount (75mm x 75mm) - Internal fan mount (40mm x 40mm x10) - Thread inserts (case and pi mounts) - Footer pins #### Required parts - Raspberry Pi 3 (B/B+) - Fan 40x40x10, 5V → [Noctua NF-A4x10 5V incl. anti-vibration mounts](https://www.amazon.de/Noctua-NF-A4X10-FLX-5V-computer-components/dp/B00NEMGCIA?language=en_GB&cy=EUR) - 4x Anti-vibration mounts (See fan) - 2x 1P Single Dupont connectors ##### Mount case - 4x M3 thread inserts → [Ruthex RX-M3x5.7](https://www.amazon.de/ruthex-Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile/dp/B08BCRZZS3?dchild=1&language=en_GB&cy=EUR) - 4x Cylindrical head screw M3 x 16mm ##### Mount Raspberry Pi / fan - 4x M2.5 thread inserts → [Ruthex RX-M2.5x5.7](https://www.amazon.de/ruthex-Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile/dp/B088QJDPKK?dchild=1&language=en_GB&cy=EUR) - 4x Cylindrical head screw M2.5 x 16mm *Optional M3 thread inserts and screws can be used. Attention the mounting holes on the Raspberry Pi must be redrilled.* ####GPIO pinout Fan red cable (Positive pole) - 100% fan speed: 5V power pin e.g. GPIO 2 - Reduced fan speed: 3V3 power pin e.g. GPIO 1 Fan black cable (Negative pole) - Ground pin e.g. GPIO 6 Newer versions are published at [prusaprinters.org](https://www.prusaprinters.org/de/social/65918-ronnys/prints)
Statistics
Likes
17
Downloads
0