Makita bubble blower
Description
When I saw this liitle one from RobKre, I want it instantly :-) I made it bigger. I made it 200% size on the turbine and the soap bowl, but also make the turbine to spin on M6x60 screw + nut and two 606-2RS bearings. I remake the bowl and tube to make stronger bindings, to fit the M6 screw and nut and the tube to fit on my Makita DUB362Z blower. I make the parts from different PLA color filaments, just to use the spares from my closet. Due to my errorI have 2 pieced bowl glued toogether and mine turbine doesn't have the screw head submerged into the turbine body, so, I unfortunately had to use longer screw, but the .stl files here are all fine. Tube and turbine needs a support on baseplate only, bowl doesn't need one. I used 0,6 nozzle with 0,4 height on bowl and tube and 0,4 nozzle and 0,3 height on turbine Here are those other non-PLA parts :-) : - M6x60 screw - M6 nut - 6mm washer - 3x wood screw 3,4x15mm or similar (3x12 should be good too) - 2x 606-2RS bearings - a lot of Bubble Blowing solution (there's no need to buy it, you can find a lot of recepies on Google) - Makita DUB362Z 36V battery blower or similar one with 75mm (outside diameter) blower tube VIDEO HERE: https://youtu.be/oCanO1Qmd4I MAKE BUBBLES AND MAKE THE KIDS HAPPY If you like my work, you can buy me a cofee or some fine creamy stout, anytime. https://www.paypal.com/paypalme/kukibiker
Statistics
Likes
57
Downloads
0