iLife v5s vacuum robot hinges
Description
Fix your broken iLife v5s vacuum cleaner robot hinges. Check pictures to understand which file you need, the original hinges are marked A and B. I recommend printing them on their side for added strenght, check pictures, don't forget to enable supports. You need to open the vacuum to install these, remove the bumper screws and remove the bumper (disconnect the plug) then remove the bigger silver screws on the bottom of the unit, turn it right side up and remove the upper part (disconnect all the plugs). Remove the old hinge by removing the screw that holds each one and carefully removing the spring. Installing the hinges can be a little tricky but you are smart and will figure it out :) This took some time to get right so if you want you can buy me a coffee by clicking "Tip Designer" or just leave a comment or don't do anythng, that works too :)
Statistics
Likes
1
Downloads
0