Left Barbie Prosthetic Leg
Description
Prosthetic leg for Barbie. Socket requires grinding out post-printing in order to fit on the residual limb - this can be done drilling a pilot hole and then using a larger bit, or using a dremel. I made modifications post-print to improve functionality including: -Adding a pin to the distal end of Barbie's limb to improve suspension, heated the end of a bolt and secured in place with super glue -Drilled hole for pin in the socket -Added a cut-out window to see limb in socket on the lateral side How to Allow Knee Flexion (Bending): -Cut between end of socket and knee -Drill screw into knee segment, leaving approximately 1/4" for a notch -Shape screw head into a reactangle -Notch distal end of socket to allow modified screwhead to slip in -Poke hole through notched distal end of socket -Align screw and mark where hole needs to be drilled, drill hole -Attach using a small nail, snip and secured sides with superglue Have fun with your new Barbie!
Statistics
Likes
27
Downloads
0