uBitX microphone
Description
This thing is a 3D-printed case for push-to-talk (PTT) microphone for the Bitx40 and uBitx QRP radio kits. These radio kits include an electret microphone element and a pushbutton switch that are used in this build. In addition to theses two items, you will also need to purchase one 3.5mm stereo jack**, four M3x10mm screws. This project requires wiring and soldering to connect the microphone, jack and PTT switch. Refer to the provided wiring diagram. ** Note: Stereo jacks come in all shapes and sizes. The stereo jack used here has a 6mm diameter threaded section and an 8mm diameter main section. You will need to find one that meets these specs in order for it to fit into the case.
Statistics
Likes
0
Downloads
0