1.2" Beadlock Wheels for RC4WD Brick Edition Tires
Description
These beadlock wheels are designed to work with the 1.2" RC4WD Brick Edition tires. They will not work with 1.0" tires. The back of the wheels have a 7mm hex. They have been tested on my SCX24-based Micro Shark with mil stone wideners. The hub area is 2mm thick for extra strength, so the barrel nuts will barely grab. In my testing, it was enough. You can reduce the thickness if you have issues with the barrel nuts coming loose, but it will reduce the strength of the wheel. The wheels are vented. Designed to be used with M1.4*6mm or 8mm hex screws, like the ones used in the SCX24. Button-head or socket cap screws should work equally well and I have tested both. Clean out all of the screw holes with a 1.2mm drill bit. STEP files are included to encourage remixing and improving this design!
Statistics
Likes
23
Downloads
0