Iron Man MK85 Helmet Motorization
Description
***Update 1/2/2021 - Added Link to "Frankly Built's" YouTube video showing the installation of the kit.*** **Also added new "Servo Horn Arm Geared (60mm)" this part serves as an upgrade to the current "Servo Horn Arm". This new part is designed to fit over the gear on the MG90s servo without the need for the Servo Horn (black arm) that comes with the Servo.** ***Update 11/16/20 - Also available for purchase is an easy to install and use Arduino shield (Nano included) designed specifically for this project. This Board comes pre-flashed with the Crashworks code installed.*** A.L.I.S.H.A.(MK2, MK5, and MK6), S.U.E. (Sound Unit Expansion), PENELOPE (USB Power Keep Alive Board) ***https://www.ebay.com/itm/403228425344*** ------------------------------------------------------------------------------------------------------------------------ ***Link to our MK46 Helmet motorization kit: https://www.thingiverse.com/thing:4640029*** ***Link to our MK7 Helmet motorization kit: https://www.thingiverse.com/thing:4630066*** *** Link to our Marvel Legends Helmet motorization kit: https://www.thingiverse.com/thing:5175364*** ------------------------------------------------------------------------------------------------------------------------ ***This is a complete motorization kit for the Mk85 helmets, and should work with most of the current MK85 designs.*** ***Use this link to download the required Arduino code for this project: https://github.com/crashworks3d/Iron_Man_Servo*** *** As the Arduino code is constantly evolving, if your code exhibits any unusual behavior please check the GitHub link to ensure you have the most current version of the Iron_Man_Servo Code *** *** Please read attached MK85 Helmet Tutorial, it lists all the steps necessary for this project*** ***You will need metric size screws for this project, the most common sizes are M3 & M4. As an example they are normally labeled as follow M3-0.5 which means M3 (Diameter / Size) -0.5(Thread Pitch), or M4-0.7 which means M4 (Diameter / Size) -0.7(Thread Pitch).*** Included are all of the files needed to fit and align servos into your helmet. Servo mounts for both the Tower pro MG90s and clone Tower pro MG90s servos are included. Included files: Tower Pro servo mount Clone Tower Pro servo mount Servo horn arm geared (60mm) Servo horn arm Servo horn arm (cap) Faceplate bracket square edge Faceplate bracket round edge Helper arm Helper arm mount for M3 (screw) Helper arm mount for M4 (screw) Servo alignment tool Helper arm alignment tool A Helper arm alignment tool B Servo mount wire cover *** Do not scale any of the files, as they are all size specific *** Print the following files: 1x Tower Pro servo mount -OR- 1x Clone Tower Pro servo mount 2x Servo horn arm -OR- ***2x Servo horn arm geared (60mm)*** ***NEW*** 2x Servo horn arm (cap) - OPTIONAL 1x Faceplate bracket square edge - OR- 1x Faceplate bracket round edge 2x Helper arm 4x Helper arm mount for M3 (screw) - OR- 4x Helper arm mount for M4 (screw) 1x Servo alignment tool 1x Helper arm alignment tool A 1x Helper arm alignment tool B 1x Servo mount wire cover - OPTIONAL
Statistics
Likes
554
Downloads
0