Artillery Sidewinder/Genius Adjustable Height Fan Duct Mount With Bl-Touch
Description
Make sure you download the correct one, there is a BMG version if you upgraded the stock extruder to a BMG. 1. insert an M3 nut in the bracket for the adjutment knob. <img src="https://drive.google.com/uc?export=view&id=1StlMA0PsAPqmwzvPyS1ZSPsNETsoMb6R" width="640"></img> 2. Use 2 M3x5mm screws to attach the bracket to the extruder assembly, motherboard screws will work. <img src="https://drive.google.com/uc?export=view&id=1gakuWbNdmjR6SYlfek4UhGlQpsBOA8rn" width="640"></img> 3. Attach the fan to the duct with the 2 stock screws from the back and 2 M3 nuts on the front. <img src="https://drive.google.com/uc?export=view&id=185zMgMETpgIinKgsD8Jh0sxmdcamnXHe" width="640"></img> 4. Heat up an M3 nut with a lighter or soldering iron and insert it to the adjutment knob, thread an M3x20 screw through it. you can also just use a screw if you don't like the knob. <img src="https://drive.google.com/uc?export=view&id=1UHAznwFi93vSf4oHOwZAPb1cZT8_A44A" width="640"></img> 5. Slide in the fan duct from the bottom to the desired height and tighten the knob. <img src="https://drive.google.com/uc?export=view&id=1AGsyMkaXx6YrDrq07UhJuCGAgeHuZGtI" width="640"></img> <a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=52VBFE8T4PV5C"/>Buy me a coffee: </br><img src="https://qph.fs.quoracdn.net/main-qimg-7feb81f45db5bd355683bc19b3c7ee00.webp"/></a>
Statistics
Likes
44
Downloads
0