Corsair iCue 220T Muscle Car Hood Scoop
Description
Im doing a custom PC build and the case (Corsair iCue 220t) is inspired by my 65 mustang. So I needed a hood scoop. Designed in Fusion360. its 325mm long and 205mm wide. And it has reliefs in the bottom mating surfaces for 5mmx1mm rare earth magnets. If you have a printer with a 350mm or larger base, you can print this with the mating surfaces down and use supports. If you have a more standard size printer, I have included the hood scoop cut in half. Just print each half and glue together. Its based off of a 65 gt350 hood scoop. Im going to refine the design over time, but I couldnt find anything that world work for my case, so here's my design. UPDATE TO V3 The V3 Scoop has been redesigned. Wall thickness has been doubled. And 2 5x9mm pins with alignment holes have been added to the front and rear halfs. Make sure you print 2 of the 5x9mm alignment pins.
Statistics
Likes
3
Downloads
0