BME 280 - desktophousing
Description
I've created this small housing for a BME280 combo sensor. It is made to put it on indoor tabletops but it should work in normal outdoor conditions too. you will also need: - 4* M3 nuts - 2* M3 x 36 mm screws - 2* M3 x 6 mm screws - 2* M3 x 10 mm screws - maybe a little bit glue to fix the nuts in position - cable min. 4 lines (for I2C) or 6 lines (for SPI)
Statistics
Likes
16
Downloads
0