Vertical and Horizontal Strain Relief for Direct Drive Extruder and Nema 17 Stepper Motor: Esp for CR10 V3
Description
These are vertical and horizontal strain reliefs that attach directly to the back plate of a Nema 17 stepper motor. Inspiration for the vertical relief is the CR10 V3 that uses the stepper motor wire connector as a strain relief for the hot end wires and routes wires like a traditional bowden setup. The horizontal relief routes cables along the X-axis with a side mounted motor as many dedicated direct drives are apt to be. Replace one or two screws with ones 5mm longer depending on the strain relief chosen. Fasteners: Vertical (2) M3 x (L+5) Horizontal (1) M3 x (L+5) QED
Statistics
Likes
5
Downloads
0