Raspberry Pi 4B Wind Tunnel Case
Description
[](https://github.com/mkellsy/rpi-case-model) I have seen various remixes accommodating different hats. One thing I have noticed is that some hats that cover the entire board cause thermal issues. I developed this case to get air in-between the hat and the main board. This uses an air duct from a fan mounted underneath the main board. This will provide air to the back and front sides of the main board as well as the underside of the hat. If you are looking for a touchscreen case, check out my matching official Raspberry Pi touchscreen case here. [https://www.thingiverse.com/thing:4610955](https://www.thingiverse.com/thing:4610955) ## Compatibility - Raspberry Pi 4 Model B ## Configurations This includes multiple top configurations; - Vented (20 mm clearance) - Touchscreen (for touchscreen hats) - MMDVM ## Assembly To assemble you will need - A #6-32 tap. - 4 x #6-32 x 1 socket head cap screws. - 8 x #6-32 x 3/4 socket head cap screws. - 4 X #4-40 x 1/4 socket head cap screws. - More screws may be needed depending on the hat requirements. More detailed instructions can be found here. [Assembly Instructions](https://github.com/mkellsy/rpi-case-model/blob/master/RPI-ASSEMBLY.md). ## Updates ### 10/1/2020 Update. - Separated fan baffle from bottom for easier printing. - Sized base vent to fit the actual opening on the bottom.
Statistics
Likes
90
Downloads
0