Adjustable sholder stock for HW40, Beeman p17 airguns
Description
This is an easy way to get a shoulder stock for your HW40 and Beeman p17. Needed Parts: 2x M4x25 Hex head 2x M4 driving nut Super Glue 4mm Drill Dremel 12mm pipe with a length of your preference (Aluminium, plastic, carbon,...). Instruction: Print all parts. Print 2x M4 screw head. Use "HW grip part 12mm" for guiding the drill to drill two hoöes in the bottom of the hand grip: <a href="https://ibb.co/QdNDQd7"><img src="https://i.ibb.co/m8qNT8r/IMG-20200330-105208.jpg" alt="IMG-20200330-105208" border="0"></a> Open the grip, fit the driving nuts, use a dremel if needed and glue them in place: <a href="https://ibb.co/yBM2mLS"><img src="https://i.ibb.co/rfL9Kns/IMG-20200330-110430.jpg" alt="IMG-20200330-110430" border="0"></a> Close the grip and this is how it should look: <a href="https://ibb.co/KjF6tMp"><img src="https://i.ibb.co/XZSXnhr/IMG-20200330-111220.jpg" alt="IMG-20200330-111220" border="0"></a> Put the M4 screw though the "M4 screw head parts" and glue them: <a href="https://ibb.co/DwkJmPQ"><img src="https://i.ibb.co/BTjpvHB/IMG-20200330-111233.jpg" alt="IMG-20200330-111233" border="0"></a> Finally, glue the 12mm pipe with a customizen lenth into the "Shoulder 12mm" and "HW40 grip part 12mm". Screw the resulting shoulder stock to you air gun: <a href="https://ibb.co/wM1b3qk"><img src="https://i.ibb.co/QrGqzVg/IMG-20200331-093743.jpg" alt="IMG-20200331-093743" border="0"></a> <a href="https://ibb.co/6R34YTV"><img src="https://i.ibb.co/XZhzXKN/IMG-20200331-201217-1.jpg" alt="IMG-20200331-201217-1" border="0"></a> Please respect your country laws before building and using it!!!! If you like my design, please feel free to support me: www.paypal.com/paypalme/michaelrose1981
Statistics
Likes
7
Downloads
0