Glidecam for DSLR/mirrorless
Description
This is a Glidecam inspired by the Devin Graham signature series. Features: -Adjustable head -Movable gimbal -Quick release plate -adjustable lenght -Extendable base plate (when using a lasercutter) The parts are 3d printed, but you will need some other part: 2 bearing (for in the arm) Inner diameter: 5 mm Outer diameter: 8 mm 2 bearing (for the grip you will hold) Inner diameter: 8 mm Outer diameter: 15 mm 1 bearing (for one the tubes) Inner diameter: 25 mm Outer diameter: 37 mm -20 mm diameter aluminium tube -15 mm diameter aluminium tube -110 mm long 5 mm thread + 1 normal nut and 1 seal nut ( for adjusting the head) -70 mm long 6 mm thread + 1 normal nut and 1 seal nut (for adjusting the head) -4 mm thread + 1 nut (for securing Quick release plate) -8 mm thread + 2 nuts ( for securing head on tube) if you lasercut the bottom plate: -8x 6 mm threads + nut (can be wing nuts for easy of use or 3d printed nop) List of 3d printed Parts: -Balance_Lower_Part (part of head) -Balance_Upper_Part (part of head) -Bottom_Main_ -Bottom_Side (print 2x) -Bottom_Attach ( Glue in 15 mm Tube) -Centre -Centre _Top -Gimbal_Arm -Gimbal_Clamp -Gimbal_Clamp_Handle -Handle_Gimbal -Head_Attach ( Glue in 20 mm Tube) -Lower_Tube_Holder -Pipe_Jam_Nut V2 -Pipe_Jam_Bolt -Quick_Release_Bolt -Quick_Release_Plate -Thumb_screw_Nop 5mm (for one the head) -Thumb_screw_Nop 6mm (for one the head) -Tube_jammer -Tube_To_Head -Tube_To_Head_Small _-Weight_Plate_Nops (instead of wing nuts)
Statistics
Likes
0
Downloads
0