HSKRC XL_ Drone feet
Description
These are feet/legs I made for the HSKRC XL_ series drone frames, you can find them on Banggood. They are fastened by M3 screws (metric), and have a little trench on the underside to run wires / squish wires through. I designed these because I bought the XL9 frame and was unhappy that it didn't come with any feet, it made a few launching issues when the wide drone was just sitting on its battery. Make sure your printer is set to 0.2mm standard quality, because the clearance is purposely tight for added impact resistance when crashing. HSKRC XL5/6/7/8/9 Drone frame: https://www.banggood.com/HSKRC-XL5-or-6-or-7-or-8-or-9-232-or-283-or-294-or-360-or-390mm-Carbon-Fiber-FPV-Racing-Frame-kit-for-RC-Drone-p-1478432.html?akmClientCountry=America&utm_source=google&utm_medium=cpc_ods&utm_campaign=nancy-content-sdsrm-test&utm_content=nancy&gclid=CjwKCAjw_NX7BRA1EiwA2dpg0n8TVf6QfPiNNrh734bHaivFPuMwp59mrR9zUJqitVI-K3_WSHP4CRoC8IgQAvD_BwE&ID=558008&cur_warehouse=CN
Statistics
Likes
6
Downloads
0